Analysis of the cause of tube explosion in heating pipe
In different environments, the heating pipes used are different, but in the process of using the heating pipes, in order to prevent the occurrence of rust, corrosion, etc., it is necessary to carry out surface treatment, and the environment is different, the surface treatment Naturally, how do you choose the right heating tube for different environments? How to handle the heating tube in a good surface during use?
If it is a liquid heating pipe, it can be divided into large and small according to the application place, and in order to prevent rust and corrosion, it is necessary to carry out surface treatment, and for these reasons, the corrosion-resistant heating pipe is decisively selected. In fact, the material and surface layer of the heating tube will directly affect whether it will burst.
In general, the selection of heating pipes will be more stainless steel, but depending on the application, even the stainless steel pipe, the material is not the same. For the heating pipe, the main factors are: material selection error , quality problems, the wall thickness is too thin, and so on. It is well understood from the first two points that as the wall thickness is too thin, it is too thin to cause damage to the external force and damage. Therefore, if there is a phenomenon of tube bursting, it is recommended to communicate with the manufacturer to make the wall thickness thicker, so that the skills can be used normally and the service life can be extended. In addition, if the magnesium oxide powder in the tube is damp, there may be a possibility of a tube burst.