Why Is The Price Gap On The Market For Tubular Heater So Big?

Why is the price gap on the market for Tubular Heater so big?
Price is one of the most concerned issues for buyers. Sometimes, the same power, different Tubular Heater manufacturers offer a difference of several times. Why is the price gap on the market for Tubular Heater so big?
Tubular Heater prices have such a big difference for the following reasons:
1. The number of electric heating tube: the number of electric heating tube affect the number of Tubular Heater life and heating efficiency, the more the number of electric heating tube more expensive. For example: I now need 1T of water heated to 80 ℃ within 2 hours, which requires 55KW flange Tubular Heater, I made the Tubular Heater to be 15 electric heating tube, the surface load of 7W, and related The unit electric heating tube with 9, the surface load of 11W, the number of electric heating pipe to reduce the cost reduction, the final product price reduction, but the higher the surface of the electric heating tube electric heating tube shorter life, the more easily damaged.
2. Production process: As the production process is different, product quality is excellent and inferior, the production of high quality qualified products must have a good production process.
3. Aftermarket: After-sales service is the most important, no matter how good the product has failed, the manufacturers of after-sales service response capacity and not timely, can not do a good job after-sales service this is the most critical. Good after-sales service to ensure that customers can use the rest assured.
Enterprises are profitable for the purpose of the product offer low, product quality will also be a problem, this will bring the production process security risks.
 Tubular Heater are working, living in the use of a more equipment, such as electric stove, electric iron, iron, electric heater, electric oven, etc. are all electric heating equipment.
Tubular Heater resistance wire is made of nickel, chromium alloy, the temperature up to 800 ℃ above. As the Tubular Heater power is relatively large, users ignore the safety, the fire may occur at any time. The reason for the occurrence of a fire in a Tubular Heater is that the Tubular Heater on which it is energized is placed on a combustible or near a combustible material and causes a fire under long periods of high temperature baking. Second, the Tubular Heater is not installed plug, directly into the socket into the socket, and thus easy to cause a short circuit and a fire. Third, the use of Tubular Heater do not leave the Tubular Heater plug unplugged for too long, resulting in Tubular Heater overheating, ignited the adjacent fuel caused by fire. Fourth, the resistance wire after repeated repair to continue to use, can cause the line overload and cause a fire.
Therefore, in use, not flammable and explosive materials on the vicinity of the Tubular Heater, must maintain a certain safe distance. The Tubular Heater must be placed on a non-thermally conductive non-combustible material base; the safe cut-off of the Tubular Heater wire must meet the capacity requirements of the Tubular Heater. The industrial Tubular Heater shall, in any case, be provided with separate circuits. The wire must be installed plug, can not be inserted into the socket directly into the socket; Tubular Heater wire damage should be replaced immediately, the circuit does not install the fuse of the Tubular Heater shall not be used; Tubular Heater must be used when care, Pull out the plug, in the course of the use, if the power failure, it should be promptly pull out the Tubular Heater plug, do not forget. For multiple repair of the resistance wire, it is best not to use, should replace the new resistance wire. Flammable and explosive materials are strictly prohibited with Tubular Heater drying; electric oven should have a temperature control device, it is necessary to prevent the temperature is too high, but also to prevent the Tubular Heater baking time is too long.
Tubular Heater wire breakage should be replaced in a timely manner, the circuit does not install the fuse of the Tubular Heater shall not be used; Tubular Heater must be used when care, leave the plug should be removed, in the course of the case, if the power failure, In time to pull out the Tubular Heater plug, do not forget. For multiple repair of the resistance wire, it is best not to use, should replace the new resistance wire. Flammable and explosive materials are strictly prohibited with Tubular Heater drying; electric oven should have a temperature control device, it is necessary to prevent the temperature is too high, but also to prevent the Tubular Heater baking time is too long.